Trait combine::Parser[−][src]

pub trait Parser<Input: Stream> {
    type Output;
    type PartialState: Default;

Show 27 methods    fn parse(
        &mut self, 
        input: Input
    ) -> Result<(Self::Output, Input), <Input as StreamOnce>::Error> { ... }

    fn parse_with_state(
        &mut self, 
        input: &mut Input, 
        state: &mut Self::PartialState
    ) -> Result<Self::Output, <Input as StreamOnce>::Error> { ... }

    fn parse_stream(
        &mut self, 
        input: &mut Input
    ) -> ParseResult<Self::Output, <Input as StreamOnce>::Error> { ... }

    fn parse_lazy(
        &mut self, 
        input: &mut Input
    ) -> ParseResult<Self::Output, <Input as StreamOnce>::Error> { ... }

    fn add_error(&mut self, _error: &mut Tracked<<Input as StreamOnce>::Error>) { ... }

    fn parse_stream_partial(
        &mut self, 
        input: &mut Input, 
        state: &mut Self::PartialState
    ) -> ParseResult<Self::Output, <Input as StreamOnce>::Error> { ... }

    fn by_ref(&mut self) -> &mut Self
    where
        Self: Sized,
    { ... }

    fn with<P2>(self, p: P2) -> With<Self, P2>
    where
        Self: Sized,
        P2: Parser<Input>,
    { ... }

    fn skip<P2>(self, p: P2) -> Skip<Self, P2>
    where
        Self: Sized,
        P2: Parser<Input>,
    { ... }

    fn and<P2>(self, p: P2) -> (Self, P2)
    where
        Self: Sized,
        P2: Parser<Input>,
    { ... }

    fn or<P2>(self, p: P2) -> Or<Self, P2>
    where
        Self: Sized,
        P2: Parser<Input, Output = Self::Output>,
    { ... }

    fn then<N, F>(self, f: F) -> Then<Self, F>
    where
        Self: Sized,
        F: FnMut(Self::Output) -> N,
        N: Parser<Input>,
    { ... }

    fn then_partial<N, F>(self, f: F) -> ThenPartial<Self, F>
    where
        Self: Sized,
        F: FnMut(&mut Self::Output) -> N,
        N: Parser<Input>,
    { ... }

    fn then_ref<N, F>(self, f: F) -> ThenRef<Self, F>
    where
        Self: Sized,
        F: FnMut(&Self::Output) -> N,
        N: Parser<Input>,
    { ... }

    fn map<F, B>(self, f: F) -> Map<Self, F>
    where
        Self: Sized,
        F: FnMut(Self::Output) -> B,
    { ... }

    fn map_input<F, B>(self, f: F) -> MapInput<Self, F>
    where
        Self: Sized,
        F: FnMut(Self::Output, &mut Input) -> B,
    { ... }

    fn flat_map<F, B>(self, f: F) -> FlatMap<Self, F>
    where
        Self: Sized,
        F: FnMut(Self::Output) -> Result<B, <Input as StreamOnce>::Error>,
    { ... }

    fn message<S>(self, msg: S) -> Message<Self, S>
    where
        Self: Sized,
        S: for<'s> ErrorInfo<'s, Input::Token, Input::Range>,
    { ... }

    fn expected<S>(self, msg: S) -> Expected<Self, S>
    where
        Self: Sized,
        S: for<'s> ErrorInfo<'s, Input::Token, Input::Range>,
    { ... }

    fn silent(self) -> Silent<Self>
    where
        Self: Sized,
    { ... }

    fn and_then<F, O, E>(self, f: F) -> AndThen<Self, F>
    where
        Self: Parser<Input> + Sized,
        F: FnMut(Self::Output) -> Result<O, E>,
        E: Into<<Input::Error as ParseError<Input::Token, Input::Range, Input::Position>>::StreamError>,
    { ... }

    fn iter(
        self, 
        input: &mut Input
    ) -> Iter<'_, Input, Self, Self::PartialState, FirstMode>ⓘ
Notable traits for Iter<'a, Input, P, S, M>
impl<'a, Input, P, S, M> Iterator for Iter<'a, Input, P, S, M> where
    Input: Stream,
    P: Parser<Input>,
    S: BorrowMut<P::PartialState>,
    M: ParseMode,     type Item = P::Output;

    where
        Self: Parser<Input> + Sized,
    { ... }

    fn partial_iter<'a, 's, M>(
        self, 
        mode: M, 
        input: &'a mut Input, 
        partial_state: &'s mut Self::PartialState
    ) -> Iter<'a, Input, Self, &'s mut Self::PartialState, M>ⓘ
Notable traits for Iter<'a, Input, P, S, M>
impl<'a, Input, P, S, M> Iterator for Iter<'a, Input, P, S, M> where
    Input: Stream,
    P: Parser<Input>,
    S: BorrowMut<P::PartialState>,
    M: ParseMode,     type Item = P::Output;

    where
        Self: Parser<Input> + Sized,
        M: ParseMode,
    { ... }

    fn boxed<'a>(
        self
    ) -> Box<dyn Parser<Input, Output = Self::Output, PartialState = Self::PartialState> + 'a>ⓘ
Notable traits for Box<R, Global>
impl<R> Read for Box<R, Global> where
    R: Read + ?Sized, impl<W> Write for Box<W, Global> where
    W: Write + ?Sized, impl<I, A> Iterator for Box<I, A> where
    I: Iterator + ?Sized,
    A: Allocator,     type Item = <I as Iterator>::Item;impl<F, A> Future for Box<F, A> where
    F: Future + Unpin + ?Sized,
    A: Allocator + 'static,     type Output = <F as Future>::Output;

    where
        Self: Sized + 'a,
    { ... }

    fn left<R>(self) -> Either<Self, R>
    where
        Self: Sized,
        R: Parser<Input, Output = Self::Output>,
    { ... }

    fn right<L>(self) -> Either<L, Self>
    where
        Self: Sized,
        L: Parser<Input, Output = Self::Output>,
    { ... }

    fn spanned(self) -> Spanned<Self>
    where
        Self: Sized,
    { ... }

}
Expand description

By implementing the Parser trait a type says that it can be used to parse an input stream into the type Output.

All methods have a default implementation but there needs to be at least an implementation of parse_stream, parse_stream, or parse_lazy. If the last is implemented, an implementation of add_error may also be required. See the documentation for parse_lazy for details.

Associated Types

The type which is returned if the parser is successful.

Determines the state necessary to resume parsing after more input is supplied.

If partial parsing is not supported this can be set to ().

Provided methods

Entry point of the parser. Takes some input and tries to parse it.

Returns the parsed result and the remaining input if the parser succeeds, or a error otherwise.

This is the most straightforward entry point to a parser. Since it does not decorate the input in any way you may find the error messages a hard to read. If that is the case you may want to try wrapping your input with an easy::Stream or call easy_parse instead.

Entry point of the parser when using partial parsing. Takes some input and tries to parse it.

Returns the parsed result and the remaining input if the parser succeeds, or a error otherwise.

Parses using the stream input by calling Stream::uncons one or more times.

Semantically equivalent to parse_stream, except this method returns a flattened result type, combining Result and Commit into a single ParseResult.

Parses using the stream input by calling Stream::uncons one or more times.

Specialized version of parse_stream which permits error value creation to be skipped in the common case.

When this parser returns PeekErr, this method is allowed to return an empty Error. The error value that would have been returned can instead be obtained by calling add_error. This allows a parent parser such as choice to skip the creation of an unnecessary error value, if an alternative parser succeeds.

Parsers should seek to implement this function instead of the above two if errors can be encountered before consuming input. The default implementation always returns all errors, with add_error being a no-op.

Adds the first error that would normally be returned by this parser if it failed with an PeekErr result.

See parse_lazy for details.

Like parse_stream but supports partial parsing.

Borrows a parser instead of consuming it.

Used to apply parser combinators on self without losing ownership.

fn test(input: &mut &'static str) -> StdParseResult<(char, char), &'static str> {
    let mut p = digit();
    let ((d, _), committed) = (p.by_ref(), letter()).parse_stream(input).into_result()?;
    let (d2, committed) = committed.combine(|_| p.parse_stream(input).into_result())?;
    Ok(((d, d2), committed))
}

fn main() {
    let mut input = "1a23";
    assert_eq!(
        test(&mut input).map(|(t, c)| (t, c.map(|_| input))),
        Ok((('1', '2'), Commit::Commit("3")))
    );
}

Discards the value of the self parser and returns the value of p. Fails if any of the parsers fails.

let result = digit()
    .with(token('i'))
    .parse("9i")
    .map(|x| x.0);
assert_eq!(result, Ok('i'));

Discards the value of the p parser and returns the value of self. Fails if any of the parsers fails.

let result = digit()
    .skip(token('i'))
    .parse("9i")
    .map(|x| x.0);
assert_eq!(result, Ok('9'));

Parses with self followed by p. Succeeds if both parsers succeed, otherwise fails. Returns a tuple with both values on success.

let result = digit()
    .and(token('i'))
    .parse("9i")
    .map(|x| x.0);
assert_eq!(result, Ok(('9', 'i')));

Returns a parser which attempts to parse using self. If self fails without committing it tries to consume the same input using p.

If you are looking to chain 3 or more parsers using or you may consider using the choice! macro instead, which can be clearer and may result in a faster parser.

let mut parser = string("let")
    .or(digit().map(|_| "digit"))
    .or(string("led"));
assert_eq!(parser.parse("let"), Ok(("let", "")));
assert_eq!(parser.parse("1"), Ok(("digit", "")));
assert!(parser.parse("led").is_err());

let mut parser2 = string("two").or(string("three"));
// Fails as the parser for "two" consumes the first 't' before failing
assert!(parser2.parse("three").is_err());

// Use 'attempt' to make failing parsers always act as if they have not committed any input
let mut parser3 = attempt(string("two")).or(attempt(string("three")));
assert_eq!(parser3.parse("three"), Ok(("three", "")));

Parses using self and then passes the value to f which returns a parser used to parse the rest of the input.

Since the parser returned from f must have a single type it can be useful to use the left and right methods to merge parsers of differing types into one.

If you are using partial parsing you may want to use then_partial instead.

let result = digit()
    .then(|d| {
        if d == '9' {
            value(9).left()
        }
        else {
            unexpected_any(d).message("Not a nine").right()
        }
    })
    .easy_parse("9");
assert_eq!(result, Ok((9, "")));

Variant of then which parses using self and then passes the value to f as a &mut reference.

Useful when doing partial parsing since it does not need to store the parser returned by f in the partial state. Instead it will call f each to request a new parser each time parsing resumes and that parser is needed.

Since the parser returned from f must have a single type it can be useful to use the left and right methods to merge parsers of differing types into one.

let result = digit()
    .then_partial(|d| {
        if *d == '9' {
            value(9).left()
        }
        else {
            unexpected_any(*d).message("Not a nine").right()
        }
    })
    .easy_parse("9");
assert_eq!(result, Ok((9, "")));

Parses using self and then passes a reference to the value to f which returns a parser used to parse the rest of the input. The value is then combined with the output of f.

Since the parser returned from f must have a single type it can be useful to use the left and right methods to merge parsers of differing types into one.

let result = digit()
    .then_ref(|d| {
        if *d == '9' {
            digit().left()
        }
        else {
            unexpected_any(*d).message("Not a nine").right()
        }
    })
    .easy_parse("98");
assert_eq!(result, Ok((('9', '8'), "")));

Uses f to map over the parsed value.

let result = digit()
    .map(|c| c == '9')
    .parse("9")
    .map(|x| x.0);
assert_eq!(result, Ok(true));

Uses f to map over the output of self. If f returns an error the parser fails.

let result = take(4)
    .flat_map(|bs| many(digit()).parse(bs).map(|t| t.0))
    .parse("12abcd");
assert_eq!(result, Ok((String::from("12"), "cd")));

Parses with self and if it fails, adds the message msg to the error.

let result = token('9')
    .message("Not a nine")
    .easy_parse(position::Stream::new("8"));
assert_eq!(result, Err(easy::Errors {
    position: SourcePosition::default(),
    errors: vec![
        easy::Error::Unexpected('8'.into()),
        easy::Error::Expected('9'.into()),
        easy::Error::Message("Not a nine".into())
    ]
}));

Parses with self and if it fails without consuming any input any expected errors are replaced by msg. msg is then used in error messages as “Expected msg”.

let result = token('9')
    .expected("nine")
    .easy_parse(position::Stream::new("8"));
assert_eq!(result, Err(easy::Errors {
    position: SourcePosition::default(),
    errors: vec![
        easy::Error::Unexpected('8'.into()),
        easy::Error::Expected("nine".into())
    ]
}));

let result = token('9')
    .expected(error::Format(format_args!("That is not a nine!")))
    .easy_parse(position::Stream::new("8"));
assert_eq!(result, Err(easy::Errors {
    position: SourcePosition::default(),
    errors: vec![
        easy::Error::Unexpected('8'.into()),
        easy::Error::Expected("That is not a nine!".to_string().into())
    ]
}));

Parses with self, if it fails without consuming any input any expected errors that would otherwise be emitted by self are suppressed.

let result = token('9')
    .expected("nine")
    .silent()
    .easy_parse(position::Stream::new("8"));
assert_eq!(result, Err(easy::Errors {
    position: SourcePosition::default(),
    errors: vec![
        easy::Error::Unexpected('8'.into()),
    ]
}));

Parses with self and applies f on the result if self parses successfully. f may optionally fail with an error which is automatically converted to a ParseError.

let mut parser = many1(digit())
    .and_then(|s: String| s.parse::<i32>());
let result = parser.easy_parse(position::Stream::new("1234")).map(|(x, state)| (x, state.input));
assert_eq!(result, Ok((1234, "")));
let result = parser.easy_parse(position::Stream::new("999999999999999999999999"));
assert!(result.is_err());
// Errors are report as if they occurred at the start of the parse
assert_eq!(result.unwrap_err().position, SourcePosition { line: 1, column: 1 });

Creates an iterator from a parser and a state. Can be used as an alternative to many when collecting directly into a Extend type is not desirable.

let mut buffer = String::new();
let number = parser(|input| {
    buffer.clear();
    let mut iter = digit().iter(input);
    buffer.extend(&mut iter);
    let i = buffer.parse::<i32>().unwrap();
    iter.into_result(i)
});
let result = sep_by(number, char(','))
    .parse("123,45,6");
assert_eq!(result, Ok((vec![123, 45, 6], "")));

Creates an iterator from a parser and a state. Can be used as an alternative to many when collecting directly into a Extend type is not desirable.

let mut buffer = String::new();
let number = parser(|input| {
    buffer.clear();
    let mut iter = digit().iter(input);
    buffer.extend(&mut iter);
    let i = buffer.parse::<i32>().unwrap();
    iter.into_result(i)
});
let result = sep_by(number, char(','))
    .parse("123,45,6");
assert_eq!(result, Ok((vec![123, 45, 6], "")));

Turns the parser into a trait object by putting it in a Box. Can be used to easily return parsers from functions without naming the type.

fn test<'input, F>(
    c: char,
    f: F)
    -> Box<dyn Parser<&'input str, Output = (char, char), PartialState = ()> + 'input>
    where F: FnMut(char) -> bool + 'static
{
    combine::parser::combinator::no_partial((token(c), satisfy(f))).boxed()
}
let result = test('a', |c| c >= 'a' && c <= 'f')
    .parse("ac");
assert_eq!(result, Ok((('a', 'c'), "")));

Wraps the parser into the Either enum which allows combinators such as then to return multiple different parser types (merging them to one)

let mut parser = any().then(|c|
    if c == '#' {
        skip_many(satisfy(|c| c != '\n'))
            .with(value("".to_string()))
            .left()
    } else {
        many1(letter())
            .map(move |mut s: String| { s.insert(0, c); s })
            .right()
    });

let result = parser.parse("ac2");
assert_eq!(result, Ok(("ac".to_string(), "2")));

let result = parser.parse("# ac2");
assert_eq!(result, Ok(("".to_string(), "")));

Wraps the parser into the Either enum which allows combinators such as then to return multiple different parser types (merging them to one)

let mut parser = any().then(|c|
    if c == '#' {
        skip_many(satisfy(|c| c != '\n'))
            .with(value("".to_string()))
            .left()
    } else {
        many1(letter())
            .map(move |mut s: String| { s.insert(0, c); s })
            .right()
    });

let result = parser.parse("ac2");
assert_eq!(result, Ok(("ac".to_string(), "2")));

let result = parser.parse("# ac2");
assert_eq!(result, Ok(("".to_string(), "")));

Marks errors produced inside the self parser with the span from the start of the parse to the end of it.

use combine::{*, parser::{char::string, combinator::spanned}};
use combine::stream::{easy, span};

let input = "hel";
let result = spanned(string("hello")).parse(
    span::Stream::<_, easy::Errors<_, _, span::Span<_>>>::from(easy::Stream::from(input)),
);
assert!(result.is_err());
assert_eq!(
    result.unwrap_err().position.map(|p| p.translate_position(input)),
    span::Span { start: 0, end: 3 },
);

Implementations on Foreign Types

Implementors